pasobweed.blogg.se

1. #INSTALL ESXI 6.5 ON SD CARD INDUSTRY STANDARD UPDATE#
2. #INSTALL ESXI 6.5 ON SD CARD INDUSTRY STANDARD ISO#

Select Yes to the Save & Exit Setup dialog, as shown in Figure11. Use the arrow keys to navigate to and configure the Station IP Address, Subnet Mask, and Gateway IP Address, then press F4 to Save & Exit as shown in Figure 10. If, like me, you prefer to use a static IP address, press Enter, use the arrow keys to select Static, and press Enter, as shown in Figure 9. Select Yes to the Save & Exit Setup dialog, as shown in Figure 8. If you want to continue using DHCP, press F4 to Save & Exit, as shown in Figure 7. Press Enter, down arrow to select Yes and press Enter, as shown in Figure 6.

#INSTALL ESXI 6.5 ON SD CARD INDUSTRY STANDARD UPDATE#

Update IPMI LAN Configuration is selected. Press Up Arrow to select BMC Network Configuration and press Enter, as shown in Figure 5. Select Enabled and press Enter, as shown in Figure 4. Note: Initially, this setting is Disabled, but I can’t take a screenshot while it is disabled. Using the arrow keys, navigate to IPMI, press the Down Arrow to select IPMI Extended Instruction, as shown in Figure 3, and press Enter. To configure IPMI in the BIOS of a TinkerTry Server, power on the server and press Delete on the appropriate screen, as shown in Figure 3. Before IPMI is usable, configure IPMI in the server’s BIOS. I used the Intelligent Platform Management Interface (IPMI) built into the TinkerTry server to do the install. Note: TinkerTry provides a 32GB thumb drive with each of their servers. After I downloaded the ISO, I used Rufus to create a bootable 32GB thumb drive from my laptop, as shown in Figure 1.

#INSTALL ESXI 6.5 ON SD CARD INDUSTRY STANDARD ISO#

The first thing is to download the latest ESXi 6.7 ISO from VMware. It is almost a “Next, Next, Install, Finish, Reboot” process. Installing VMware ESXi 6.7 is easy as there are not many installation options.